Saturday, July 18, 2009

Sorry for delay

here is the last... Frame prepped today. Tip***

chase the shell BEFORE paint. If the tool binds and racks the threads.. silver can be added to repair.. Not that I have ever had this problem.. but just saves a paint job if something goes wrong. Also fit the chain stays in the shell ( if using lugs) so that there is minimal material protruding into the shell. This makes for a smooth tap cutting job to full depth. Otherwise the excess material will need to be removed so that the lead in of the taps will clear. DO NOT USE A GRINDING STONE!!! do the job with a file. Fragments of the grinding stone might embed into the steel. this will reak havok on any tap feed into the shell... HSS is fragile and if it sees ANY sort of stone fragments.. the tap will fracture and dull..

The best practice is to build it tight and not have to remove marterial!


Public service announcement over.
Photos..




Sunday, June 21, 2009

Wednesday, June 17, 2009

crimp

Made a crimping die to form the drive side CS for gear cluster clearance. Using forward facing tips... first step away from single speed! Need to dial in the male insert to create a form that is pleasing and works. Six tons of pressure later... This effort works and will be encorperated.. just need to fine tune... al things in good time!
Cheers,



CW

latest
















Saturday, June 6, 2009

mock up

today was prepping the ST sleeve to match whats going on with the rest. That and some lug finishing... lotsa file work Yo!! Then to loose fit the sub-assemblies together to make sure what I have in my brain matches the work that is going on with reality. All cool so far! Just a little of this and that to fine tune curve and 'linewise' so it all plays nice!
























Sunday, May 31, 2009

sub-assemblies

with some atmo mixed in!! shore lines are good but the wash bothers me. Time and time again working will refine. The fork sockets are half done.. ran outa steam for this day.. now I just gotta match.





































Monday, May 25, 2009

First try at lug work.. Just shaping and thinning little bit